My 1960 B-75

Truck Shop

Well-known member
I custom cut and rolled these fender extensions to attach to fenders and fender panels, perfect radius all made from 14 gauge.
Plus there are horizontal braces that will be riveted to the panels on the inside the full length.

006 (4).JPG008 (2).JPG009.JPG011.JPG012.JPG
 

Truck Shop

Well-known member
The curved pieces will be black to match fenders, the large filler panels will be the same as cab. Working on the inner mounts and
stabilizers for the filler panels. And the hood could possibly be made out of aluminum, haven't made up my mind yet.
 

Truck Shop

Well-known member
A few set backs, had to change oil pump-developed a crack in pipe plug threads, on a fitting I never turned. Fan hub started having issues so
replaced it with a Horton 7500HP-found a good used one. And for the third time removed the PT pump and had to insist the throttle shaft be
changed because it still had a erratic idle from internal leakage. Put a tee in the fuel feed line and it now has fuel feeding front and back heads.
Finished fabricating and polishing the 18"X 88"X 3/16" stainless bumper.
 
Top