Search results

  1. L

    Late 3406C Exhaust gaskets

    I have to do the exhaust gaskets on my 3406C, it has round port heads, I haven't called a teps dealer to get a price on OEM parts, but I have heard that guys are really liking Bully dog gaskets and studs, have any of you guys used their stuff , or have any insights, before Cat outsourced...
  2. L

    Engine Start module

    Has anybody had any experience with either of these :http://www.maxwell.com/esm/ or http://www.skelstart.com/engine-start-module/ If they are 1/2 as good as the sites say they will be a welcome addition. the concept is: the trucks batteries can charge the capacitor module to cranking voltage...
  3. L

    366/6.0 tall deck Gen V / VI questions

    A 95 ish topkick with the above mentioned engine showed up, a wrecker was going to swap a 454 standard deck into it but decided it was outside his realm. One of the owners friends told him the engine in the truck was a 396, another said it was a crate motor, but everybody was sure it wasn't a...
  4. L

    Thinking about converting a ground bearing trailer to nonground bearing

    If you are going to the work of refitting you RGN, you might want to consider the Aspen style of neck , it seems that most Canadian manufacturers have gone to a close copy, Landoll also has a pretty good system this video shows the system starting at about 2:30...
  5. L

    ISC headaches

    working on an FL80 with an early ISC ,8.3 CAPS engine CPL 2689. It shows fuel issues, low power, but more like the electronics aren't sending the signals, shows one code that will never clear 128 152 7 SID, boost erratic or intermittent. I did the battery connection check and clean already. I...
  6. L

    My take on DT466E HUEI poor / no start troubleshooting

    this is a cut and paste of a post that I did on another Forum, I am the original author. My take on 466E HUEI troubleshooting ________________________________________ I just finished a 466E , hard start/ no start chase. It all seems crystal clear NOW. Recap. truck showed up operator said it...
  7. L

    Peterbilt Schematics

    Link to Pete schematics http://www.supermiller.com/ you click the link let it load then go to the right side of the page scroll down until you find a drop down box (box 4 is schematics) click the drop button and then select the schematic you need. You don't need to sign in or create an account...
Top