T800 clutch pedal removal
- Thread starter Brent4
- Start date
Truck Shop
Well-known member
With dash panel pulled back there is a cover or plate that goes over the steering column support with that removed you will be able to remove the cross shaft
screws and bearing supports for pedal. Then you can remove the linkage rod going downward through the floor. There is also a clutch pedal return spring
attached to that arm. Careful not to damage the clutch pedal micro switch for the cruise/jakes, I would remove that first.
Truck Shop
screws and bearing supports for pedal. Then you can remove the linkage rod going downward through the floor. There is also a clutch pedal return spring
attached to that arm. Careful not to damage the clutch pedal micro switch for the cruise/jakes, I would remove that first.
Truck Shop